Okay, here’s my blog post about making beverage coaster sets, written in a casual, conversational style, and focused on the process:
So, I’ve been seeing these cute coaster sets all over Pinterest, and I thought, “Hey, I can totally make those!” I’m all about DIY projects, especially ones that are both practical and pretty. Plus, I had some leftover materials from another project, so it felt like the perfect time to try this out.
Gathering My Supplies
First things first, I needed to gather my supplies. This is what I pulled together:
- Tiles: I used some plain white ceramic tiles that I had lying around. You can get these at most hardware stores, usually pretty cheap.
- Felt: I picked up a few sheets of colorful felt to use as the backing for the coasters. This helps protect furniture and adds a nice finished look.
- Design Materials:Here,There are lots of options: I see there are paint, decorative paper, stamps, stencils…pretty much anything you can think of to decorate the top of the tiles.I choose some cool scrapbook paper I had.
- Glue: I used some super strong adhesive to attach the felt and also sealed Mod Podge (you know, the stuff that’s both a glue and a sealer).
- Scissors/Cutting Tool:For cutting the felt and paper.
- Optional: Clear sealant spray, to really protect the finished coasters.
Getting Started: Prepping the Tiles
I made sure my tiles were clean and dry. Any dust or dirt will mess up the design later, so a quick wipe-down is important.
Creating My Design
I had these awesome scrapbook paper sheets with a funky geometric pattern.I have already decided to use them!
I carefully measured and cut the paper to fit the top of each tile, making sure the pattern lined up nicely. Then, I used a thin layer of Mod Podge to stick the paper down. I smoothed it out really well to avoid any bubbles or *’s like wallpapering, but tiny!
Sealing Everything Up
Once the Mod Podge was dry (I waited a few hours, just to be sure), I applied another coat on top of the paper. This seals the design and makes the coasters water-resistant. You might need two or even three coats, depending on how thick you apply it. Again, patience is key – let each coat dry completely!
Adding the Felt Backing
While the top was drying, I worked on the felt backing. I traced the shape of a tile onto the felt and cut out four pieces (one for each coaster). Then, using the super strong adhesive, I glued the felt to the bottom of each tile. I made sure to press down firmly to get a good bond.
And that’s it.
The Final Touches (and a Bit of a Mistake!)
I thought I was totally done, but then I realized I should probably add another layer of protection. So, I grabbed a can of clear sealant spray and gave the coasters a final coat. It’s important that you do this in a well-ventilated * smell is pretty strong.
And there you have it – my homemade beverage coaster set! They turned out pretty great, if I do say so myself. It was a fun and easy project, and now I have a unique set of coasters that I made with my own two hands. Plus, I saved some money by using materials I already had. Win-win!
